Superlucky Union Inc.
Add to Cart
Brief Introduction of Thermal CTP Plate Processor:
Especially used to develop Thermal CTP Plates. The whole working process contains four steps: Developing - Washing - Gumming - Baking/Drying.
Pipelines :
1,Develop pump pipe 2,Glue pump pipe 3,Develop replenishment pipe 4,Glue recycle pipe 5,Tape water receive 6,Develop replenishment pump 7,Glue pump 8,Develop recycle pump 9,Filter 10,Pump
Drawings of machine:
Machine's Specification:
| Model | SL-65TH | SL-88TH | 105TH | SL-135TH |
| Material | Thermal CTP plate | |||
| Capacity | 20-150 cm/min | |||
| Plate width (mm) | 650 | 880 | 1050 | 1350 |
| Min. Plate length(mm) | 300 | 450 | 450 | 450 |
| Plate thickness(mm) | 0.15-0.4 | |||
| Tank content, developer(L) | 25 | 50 | 55 | 68 |
| Tank content, wash(L) | 9 | 13.5 | 15 | 20 |
| Adjustable temperature, dev | 0 to 40 degree C. adjustable | |||
| Adjustable temperature, dry | normal temperature to 70 degree C. | |||
| Water consumption, max | 6 L/min | 8 L/min | 9 L/min | 12 L/min |
| Diameter of wash brush (mm) | 50 | |||
| Rotary speed of wash brush | 80 rpm | |||
| Filter(um) | 75 | |||
| Water supply | Tap water (min. pressure 1 bar) | |||
| Gumming | Roller pressing gumming | |||
| Diameter of roller | 60mm | |||
| Dev. replenishment | 0-1L per plate | |||
| Dev. heating-up rate | 0.5 degree C. per minute | |||
| Horizontal adjustment | Adjustable | |||
| Power supply | 380V 3 phases 50-60Hz | |||
| Power consumption (kwh) | 3.5 | 3.5 | 3.8 | 4.5 |
| Voltage fluctuation | within 10% | |||
| Gross weight(kg) | 400 | 500 | 610 | 780 |
| Net weight(kg) | 320 | 420 | 450 | 650 |
Note: Special models are customers tailored.